Zdravím, měl bych prosbu mám tady CAPsMAN s 3x CAP a ani jedno AP nejsem schopný nastavit tak aby byl Down speed větší než cca 5Mbit přitom linka je 20Mbit. Můžete pls poradit co ještě poladit aby to jelo v rychleji? přitom v default konfiguraci mikrotiku bez CAP to jede normálně 20/20... hlavní router je 951Ui-2Hdn totéž i caps... využití procesoru na hlavních i CAPs je max 5%...Díky.
# mar/23/2018 11:32:08 by RouterOS 6.41.3
# software id = FD2V-UA3G
#
# model = 951Ui-2HnD
# serial number = XXXXXXX
/caps-man channel
add band=2ghz-b/g/n control-channel-width=20mhz extension-channel=disabled \
frequency=2412 name=Kanal1
add band=2ghz-b/g/n control-channel-width=20mhz extension-channel=Ce \
frequency=2432 name=Kanal5
add band=2ghz-b/g/n control-channel-width=20mhz extension-channel=disabled \
frequency=2452 name=Kanal9
add name=channel1
/interface bridge
add fast-forward=no name=bridge1
/interface ethernet
set [ find default-name=ether1 ] mac-address=XXXX name=\
ether1-WAN
set [ find default-name=ether2 ] name=ether2-LAN
set [ find default-name=ether3 ] name=ether3-LAN
set [ find default-name=ether4 ] name=ether4-LAN
set [ find default-name=ether5 ] name=ether5-LAN
/interface wireless
# managed by CAPsMAN
# channel: 2412/20/gn(20dBm), SSID: XXXX, CAPsMAN forwarding
set [ find default-name=wlan1 ] ssid=MikroTik
/caps-man datapath
add bridge=bridge1 client-to-client-forwarding=yes name=datapath1
/caps-man security
add authentication-types=wpa2-psk encryption=aes-ccm group-encryption=aes-ccm \
name=Klic passphrase=XXXX
/caps-man configuration
add country="czech republic" datapath=datapath1 mode=ap name=cfg1 security=\
Klic ssid=XXXX
/caps-man interface
add channel=Kanal1 configuration=cfg1 disabled=no l2mtu=1600 mac-address=\
XXX master-interface=none name=cap1 radio-mac=\
XXX
add channel=Kanal5 configuration=cfg1 disabled=no l2mtu=1600 mac-address=\
XXX master-interface=none name=cap2 radio-mac=\
XXX
add channel=Kanal9 configuration=cfg1 disabled=no l2mtu=1600 mac-address=\
XXX master-interface=none name=cap3 radio-mac=\
XXX
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
/ip pool
add name=dhcp_pool0 ranges=XXXX
/ip dhcp-server
add address-pool=dhcp_pool0 disabled=no interface=bridge1 name=dhcp1
/caps-man manager
set enabled=yes
/caps-man provisioning
add action=create-dynamic-enabled master-configuration=cfg1
/interface bridge port
add bridge=bridge1 interface=ether2-LAN
add bridge=bridge1 interface=ether3-LAN
add bridge=bridge1 interface=ether4-LAN
add bridge=bridge1 interface=ether5-LAN
add bridge=bridge1 interface=wlan1
/interface wireless cap
#
set bridge=bridge1 discovery-interfaces=bridge1 enabled=yes interfaces=wlan1
