Chtěl jsem rozšířit internet na zahradu a tak mi bývalý kolega z práce poradil tohoto klienta a nastavil ho.
https://www.i4wifi.cz/cs/210647-mikrotik-routerboardy-rbwap2nd-wap-venkovni-ap-vsesmerova-antena-2-dbi-1x-lan-l4-2-4ghz-bila-html
Internet funguje , ale zjistil jsem, že samotný klient se k internetu připojit nedokáže a tak nefunguje upgrade ani synchronizace času. Nastavit si starý router na zvýšení dosahu doma dokážu, ale tohle je na mě už moc složitý. Dokážete vyčíst něco z logu co je špatně ?
> export
# may/09/2019 11 by RouterOS 6.40.4
# software id = HCUG-NPVF
#
# model = RouterBOARD wAP 2nD r2
# serial number = 6D8208AD3515
/interface bridge
add name=bridge1
/interface wireless security-profiles
set radius-mac-authentication=yes supplicant-identity=MikroTik
add authentication-types=wpa-psk management-protection=allowed mode=dynamic-keys name=key supplicant-identity=MikroTik wpa-pre-shared-key=123456789
add authentication-types=wpa-psk,wpa2-psk eap-methods="" management-protection=allowed name=profile1 supplicant-identity=""
/interface wireless
set band=2ghz-b/g/n country="czech republic" default-authentication=no disabled=no mode=ap-bridge security-profile=profile1 ssid=2.4G wps-mode=\
disabled
/ip hotspot profile
set html-directory=flash/hotspot
/ip pool
add name=dhcp_pool0 ranges=192.168.1.2-192.168.1.254
add name=dhcp_pool1 ranges=192.168.1.2-192.168.1.254
add name=dhcp_pool2 ranges=192.168.1.2-192.168.1.254
/ip dhcp-server
add address-pool=dhcp_pool2 disabled=no interface=bridge1 name=dhcp1
/interface bridge port
add bridge=bridge1 interface=ether1
add bridge=bridge1 interface=wlan1
/interface wireless access-list
add interface=wlan1 mac-address=D0 vlan-mode=no-tag
/ip address
add address=192.168.1.141/24 interface=ether1 network=192.168.1.0
/ip arp
add address=192.168.1.1 interface=ether1 mac-address=38
add address=192.168.1.214 interface=ether1 mac-address=60
/ip dhcp-server network
add address=192.168.1.0/24 dns-server=192.168.1.1 gateway=192.168.1.1 netmask=24
/ip dns
set allow-remote-requests=yes servers=8.8.8.8
/ip firewall nat
add action=masquerade chain=srcnat
/port firmware
set directory=""
/system clock
set time-zone-name=Europe/Prague
/system ntp client
set enabled=yes primary-ntp=89.221.218.101 server-dns-names=0.cz.pool.ntp.org
/system package update
set channel=development
/system upgrade upgrade-package-source
add address=192.168.1.141 user=admin