Zdravím, na webu jsem našel konfiguraci na EOIP. Autor tvrdí, že mu to funguje. Nezdá se mi to, ledaže by to bylo odvislé od verze ROS.
Mohl by se na to prosím mrknout někdo, kdo je zběhlý ve skriptech a ev. napravit chyby?
Díky, mpcz, 12jun2023
MikroTik1
/interface ethernet
set [ find default-name=ether1 ] comment=vpn1 mac-address=CC:2D:E0:B8:B7:E2
set [ find default-name=ether2 ] comment=LAN
set [ find default-name=ether3 ] disabled=yes
set [ find default-name=ether4 ] disabled=yes
/interface eoip add mac-address=02:C3:1F:39:E0:FD name=eoip-tunnel1-hd1-remote remote-address=10.10.2.2 tunnel-id=111
/interface bridge port add bridge=bridge1 interface=ether2
/interface bridge port add bridge=bridge1 interface=eoip-tunnel1-hs1-remote
/ip address add address=10.10.1.2/24 interface=ether1 network=10.10.1.0
/ip route add distance=1 gateway=10.10.1.1
/system identity set name=MikroTik1
MikroTik2
/interface ethernet
set [ find default-name=ether1 ] comment=vpn2
set [ find default-name=ether2 ] comment=lan
set [ find default-name=ether3 ] disabled=yes
set [ find default-name=ether4 ] disabled=yes
/interface eoip add mac-address=02:11:25:7B:19😃C name=eoip-tunnel2-Hd2-VPN2-main remote-address=10.10.1.2 tunnel-id=111
/interface bridge port add bridge=bridge1 interface=eoip-tunnel2-Hd2-VPN2-main
add bridge=bridge1 interface=ether2
/ip address add address=10.10.2.2/24 interface=ether1 network=10.10.2.0
/ip route add distance=1 gateway=10.10.2.1
/system identity set name=MikroTik2
