Dobry den,
poprosil bych o pomoc s resenim meho problemu. Mam pomalou wifi na 5G, mam mikrotik hap ac+, thinkpad t570 a nas na 1Gb. Kdyz kopiruju z NASu, rychlost mne kolisa mezi 180-600Mbit viz graf. Kdyz kopiruju ale z NTB na nas, neprelezu 100mbit at delam co delam, nic mne nepomaha, predpokladam ze mam nekde neco velmi spatne a nedokazu prijit na to kde. Kdyz se podivam na site co tu mam, jsem tady na 5G sam jako kul v plote. Vzdalenost ntb a hap je cca 3m. Jse z toho pomerne nestastny a nedokazu se z toho vlastnima silama dostat. Karta v notasu hlasi ze je spojena s hap na 867mbit, kdyz se podivam na insssider vidim to same. Posilam rovnou i log at se muzete zasmat jak tomu nerozumim... Popravde tomu fakt nerozumim, proto potrebuju help.
Dekuju predem za Vasi pomoc.
may/17/2020 10:46:30 by RouterOS 6.46.6
software id = X4LB-GHNE
model = RBD52G-5HacD2HnD
serial number = xxxx
/interface bridge
add admin-mac=74:4D:28:4B:E0:13 auto-mac=no comment=defconf name=bridge
/interface wireless
set [ find default-name=wlan1 ] antenna-gain=0 band=2ghz-b/g/n channel-width=\
20/40mhz-XX country=no_country_set disabled=no distance=indoors \
frequency=auto frequency-mode=manual-txpower mode=ap-bridge ssid=darknet \
wireless-protocol=802.11
set [ find default-name=wlan2 ] antenna-gain=0 band=5ghz-onlyac \
channel-width=20/40/80mhz-XXXX country=no_country_set disabled=no \
distance=indoors frequency=auto installation=indoor mode=ap-bridge ssid=\
"darknet 5G" wireless-protocol=802.11
/interface list
add comment=defconf name=WAN
add comment=defconf name=LAN
/interface wireless security-profiles
set [ find default=yes ] authentication-types=wpa2-psk mode=dynamic-keys \
supplicant-identity=MikroTik wpa-pre-shared-key=Nakonecne2 \
wpa2-pre-shared-key=Nakonecne2
/ip hotspot profile
set [ find default=yes ] html-directory=flash/hotspot
/ip pool
add name=dhcp ranges=192.168.1.5-192.168.1.254
/ip dhcp-server
add address-pool=dhcp disabled=no interface=bridge name=defconf
/user group
set full policy="local,telnet,ssh,ftp,reboot,read,write,policy,test,winbox,pas\
sword,web,sniff,sensitive,api,romon,dude,tikapp"
/interface bridge port
add bridge=bridge comment=defconf interface=ether2
add bridge=bridge comment=defconf interface=ether3
add bridge=bridge comment=defconf interface=ether4
add bridge=bridge comment=defconf interface=ether5
add bridge=bridge comment=defconf interface=wlan1
add bridge=bridge comment=defconf interface=wlan2
/interface list member
add comment=defconf interface=bridge list=LAN
add comment=defconf interface=ether1 list=WAN
/ip address
add address=192.168.1.1/24 comment=defconf interface=ether2 network=\
192.168.1.0
/ip dhcp-client
add comment=defconf disabled=no interface=ether1
/ip dhcp-server network
add address=192.168.1.0/24 comment=defconf gateway=192.168.1.1 netmask=24
/ip dns
set allow-remote-requests=yes
/ip dns static
add address=192.168.1.1 name=router.lan
/ip firewall filter
add action=accept chain=forward comment="defconf: accept in ipsec policy" \
ipsec-policy=in,ipsec
add action=accept chain=forward comment="defconf: accept out ipsec policy" \
ipsec-policy=out,ipsec
add action=fasttrack-connection chain=forward comment="defconf: fasttrack" \
connection-state=established,related
add action=accept chain=forward comment=\
"defconf: accept established,related, untracked" connection-state=\
established,related,untracked
add action=drop chain=forward comment="defconf: drop invalid" \
connection-state=invalid
add action=drop chain=forward comment=\
"defconf: drop all from WAN not DSTNATed" connection-nat-state=!dstnat \
connection-state=new in-interface-list=WAN
/ip firewall nat
add action=masquerade chain=srcnat comment="defconf: masquerade" \
ipsec-policy=out,none out-interface-list=WAN
/ip ssh
set allow-none-crypto=yes forwarding-enabled=remote
/system clock
set time-zone-name=Europe/Prague
