Script na sledování PSU

Levian

Caute. Nema niekto funkcny skript na MK ktory sleduje PSU status a v pripade vypadku zdroja posle mail.
Nasiel som tento skript ale nechodi to.. MK 7.12.1

:global PSUfail "fail"
:local PSU1state [/system health get psu1-state]
:local PSU2state [/system health get psu2-state]
:if ($PSU1state = $PSUfail) do={/tool e-mail send to="xxx@gmail.com" body="PSU1 has failed" subject="**Router PSU failure**"}
:if ($PSU2state = $PSUfail) do={/tool e-mail send to="xxx@gmail.com" body="PSU2 has failed" subject="**Router PSU failure**"}

coitus

Tu je script co sleduje na vodojeme (len solarne napajanie) napatie baterie a ak je mensie ako ... tak odosle email a pushover hlasenie. psu2-voltage je CRS318-16P-2S+OUT (netPower 16P) a ten ma dva zdroje. 48V je priamo z baterie a 24V je DC/DC. Verzia ROS je 7.11.2

/system health
:local voltSystem ([get [find where name=psu2-voltage]]->"value")
:local voltMin    48
# Check Voltage
:if ($voltSystem <= $voltMin) do={
    :log error "LOW Voltage: $voltSystem V"
/tool e-mail send to=xxx@xxx.sk subject="Gulaxxx" body="$voltSystem V" 
/tool fetch mode=https url="https://api.pushover.net/1/messages.json" http-method=post keep-result=no \
    http-data="token=xxx&user=xxx&sound=gamelan&priority=1&title=$ime&message=$voltSystem V"

} else={
    :log info "Voltage OK: $voltSystem V"
}

goblajz

:local mailserver [:resolve TVUJ.SMTP.SERVER];
:local mailfrom "MAIL_OD";
:local mailto "MAIL_KAM";
:local upsName "ups1";


:global flagonbatt;
:global flagbattlow;

:local battalarm 15;
:local battok 40;

:local curonline;
:local curcharge;

:local sysname [/system identity get name];
:local datetime "$[/system clock get date] $[/system clock get time]";

:if ([:typeof $flagonbatt]="nothing") do={:set flagonbatt 0}
:if ([:typeof $flagbattlow]="nothing") do={:set flagbattlow 0}

:set curonline true;
:set curcharge 100;
/system ups monitor [/system ups find name=$upsName] once do={
  :set curonline $"on-line"; :set curcharge $"battery-charge";
}

:if (($curonline=false) && ($flagonbatt=0)) do={
  :set flagonbatt 1;
 /tool e-mail send from=$mailfrom  to=$mailto server=$mailserver subject="$sysname: Problém s napájením!" \
    body="$sysname je bez napájení od $datetime";
  :log error "Power-Fail: EMail sent to $mailto";
}

:if (($curonline) && ($flagonbatt=1)) do={
 :set flagonbatt 0;
 /tool e-mail send from=$mailfrom  to=$mailto server=$mailserver subject="$sysname: Obnovené napájení" \
    body="$sysname napájení bylo obnoveno v $datetime";
  :log error "Power-Restore: Email sent to $mailto";
}

:if (($curcharge <= $battalarm) && ($flagbattlow=0)) do={
  :set flagbattlow 1;
  /tool e-mail send from=$mailfrom  to=$mailto server=$mailserver subject="$sysname: Nízký stav baterie!" \
    body="$sysname baterie je na $curcharge %! $datetime";
  :log error "Batt-Low: Email sent to $mailto";
}

:if (($curcharge >= $battok) && ($flagbattlow=1)) do={
  :set flagbattlow 0;
  /tool e-mail send from=$mailfrom  to=$mailto server=$mailserver subject="$sysname: Baterie se nabíjí" \
    body="$sysname baterie nabita na $curcharge% $datetime";
  :log error "Batt-Recharged: Email sent to $mailto";
}

Levian

Dik za scripty, len tieto neviem u mna pouzit na CCR1036. Tam neviem vycitavat napatie. Mam tam 2 zdroje a stav je bud OK alebo fail.

tulo

Na inych strojoch z dvoma zdrojmi sa da normalne vycitat napatie. Tiez som cakal dlho kym to mikrotik dorobil. Na Crs112 to bolo rovnako nebola podpora vycitania napatia. Potom to dorobili. Teraz bezne aj z netpower switchov vycitavame napatie. Ked bezi switch z bateriek klesa napatie a dude hlasi. Vies odhadnut kedy uz treba ruky na bradavky a ist startovat centralu.

Levian

Ked bude dorobene vycitavanie da sa pouzit tento tvoj skript samozrejme. Akurat teraz mi to ale nepomoze...

Levian

Nikto nic? Nema to nikto rozchodene este bez vycitavania napatia, len na zaklada stavu OK a FAIL

kybernet

Levian Mozna se ti nevycita spravne
:local PSU1state [/system health get psu1-state]
:local PSU2state [/system health get psu2-state]

Tak zkus system/health/print ... to ti ukaze na kterym cisle mas psu:
Columns: NAME, VALUE, TYPE

NAME VALUE TYPE

0 cpu-temperature 45 C
1 sfp-temperature 69 C
2 switch-temperature 48 C
3 fan1-speed 1410 RPM
4 fan2-speed 1320 RPM
5 board-temperature1 34 C
6 board-temperature2 35 C
7 psu1-state ok
8 psu2-state ok

a pak to nahrat timto "system/health/get number=cislo_PSU value" tedy sprave
:local PSU1state [/system/health/get number=7 value]
:local PSU2state [/system/health/get number=8 value]